Quick Answer

In Southwest Michigan in 2026, a new exterior door installed typically runs $700 to $2,000 for steel, $1,800 to $5,000 for fiberglass, and $3,500 to $9,000+ for solid wood. Most homeowners replacing a standard 36-inch front door land between $2,200 and $3,800 all in. Adding sidelites, a transom, decorative glass, or a factory finish is what moves a project from the low end of that range to the high end — not the slab itself.

Front entryway with a wood entry door, sidelites and transom
A single slab, two sidelites, and a transom can be three times the price of the same door on its own.

2026 Exterior Door Prices at a Glance

These are the installed price ranges we actually see across our eight Southwest Michigan showrooms. Installed means the door, the frame, standard hardware, labor, and haul-away — not just the slab off the rack.

  • Steel entry door$700 – $2,000
  • Fiberglass entry door$1,800 – $5,000
  • Solid wood entry door$3,500 – $9,000+
  • Entry door with two sidelites$3,500 – $9,000
  • Sliding patio door$2,000 – $6,500
  • French or hinged patio door$4,000 – $9,000
  • Storm door$400 – $1,000
  • Interior door$250 – $900

Ranges this wide are frustrating, so the rest of this guide is about narrowing them. By the end you should be able to look at your own opening and predict roughly where your quote will land.

What “Installed” Should Actually Include

The most common reason two quotes for the same door differ by a thousand dollars is that they are not quoting the same scope. A complete exterior door price should cover all of the following:

  • The slab — the door itself, including any glass insert
  • The frame — jambs, brick mold, and the threshold or sill
  • Weatherstripping and sweep — factory-applied on a prehung unit
  • Hardware — at minimum a handleset and deadbolt, bored and prepped
  • Labor — removal, dry fit, shimming, fastening, foaming, sealing
  • Flashing — sill pan and head flashing, which are not optional in this climate
  • Interior and exterior trim — casing, caulk, and touch-up
  • Disposal — hauling the old unit away

If a quote is missing flashing, trim, or hardware, it is not a lower price. It is a smaller job with the rest coming later.

Exterior Door Cost by Material

Door Type Slab Only Installed (36″ single) Realistic Lifespan Best For
Steel $200 – $600 $700 – $2,000 15 – 25 years Budget and protected openings
Smooth fiberglassBEST VALUE $500 – $1,200 $1,800 – $3,000 30+ years Most front doors
Wood-grain fiberglass $900 – $2,000 $2,500 – $4,000 30+ years Wood look, low upkeep
Premium fiberglass $1,600 – $3,500 $3,500 – $6,500 30 – 40 years High-end curb appeal
Solid wood $1,500 – $5,000 $3,500 – $9,000+ 20 – 40 years with upkeep Historic homes, covered porches

If you are weighing the first two rows against each other, we broke the decision down in detail in steel vs. fiberglass entry doors for Michigan homes.

The Upgrades That Actually Move the Price

Here is where the money goes once you get past the base door. These are add-on costs on top of the installed price above.

  • Two sidelites+$1,200 – $3,500
  • Transom above the door+$600 – $1,800
  • Decorative or privacy glass+$300 – $1,200
  • Factory prefinish (paint or stain)+$400 – $1,200
  • Multipoint locking hardware+$250 – $1,200
  • Upgraded handleset and deadbolt+$150 – $500
  • Composite or PVC jamb upgrade+$100 – $250
  • Non-standard size (42″ wide or 8′ tall)+15% – 40%

Two of these deserve a note. Factory prefinish looks expensive until you price a painter, and a factory finish is applied in controlled conditions with a much stronger warranty behind it — on an exposed door it is one of the better dollars you can spend. Composite or PVC jambs are a small upgrade that solves the single most common failure we see on Michigan entries: a rotted jamb bottom where snow piles against the threshold every February.

Slab Only vs. Prehung vs. Full-Frame

How the door goes in matters as much as which door you pick, and this is the line item most homeowners have never heard of.

Slab only is the cheapest path — you keep the existing frame and hang a new door in it. It only works if the current frame is plumb, square, dry, and sound, and if you can live with the existing hinge and lock locations. In a settled Michigan house with an original frame from 1958, that is a rare combination. When it does work, you save several hundred dollars.

Prehung insert is the standard for a reason. The slab arrives already hung in a new frame with the weatherstrip and threshold attached and the hinges aligned at the factory. It drops into the existing rough opening. This is what nearly every price in this guide assumes.

Full-frame replacement pulls the interior and exterior trim so the installer can see the rough opening, repair anything rotted, and flash the sill properly before the new unit goes in. It adds $400 to $1,500, and it is the right call any time there is water staining, soft wood at the sill, or a stoop that has heaved.

What Michigan Openings Add to the Bill

Every market has its own surprises. Ours are pretty consistent:

  • Frost-heaved stoops. Concrete that has lifted an inch over thirty winters leaves the sill unsupported and the door out of square. Shimming and re-leveling adds labor; a badly heaved stoop is its own project.
  • Rotted subsill and framing. Decades of no pan flashing means water has been running into the framing under the threshold. Repair typically runs $250 to $1,200 depending on how far it has traveled.
  • Out-of-square openings. Pre-1940 homes in Niles, Dowagiac, and South Haven were built plumb and have not stayed that way. Expect extra time and, occasionally, a custom-sized unit.
  • Aluminum-capped brick mold. Common on 1970s and 1980s siding jobs. It has to be removed and rewrapped, which is a trim-carpentry line item, not a door line item.
  • Storm door reinstalls. An old storm door rarely lines up with a new frame. Budget for a new one or for the labor to refit the old.

Patio Doors Are a Different Conversation

Patio door pricing has less to do with material and more to do with size and operation. A standard 6-foot vinyl slider is genuinely affordable. A 12-foot four-panel clad-wood unit with a low-profile sill is a window project wearing a door costume.

  • Vinyl sliding patio door (6′)$2,000 – $3,500
  • Fiberglass or clad-wood slider$3,500 – $6,500
  • French or hinged patio door$4,000 – $9,000
  • Multi-slide or oversized units$10,000+

If you are opening up a lakeside view, the sill detail and the exposure matter more than the brand. We wrote about that tradeoff specifically in getting Bridgman backyards right, and you can browse configurations on our patio doors page.

Where to Spend and Where to Save

✓ Worth Paying For

  • Proper sill pan flashing and full-frame work if the opening is compromised
  • Composite or PVC jamb bottoms
  • An adjustable threshold you can tune as the house moves
  • Factory prefinish on any exposed door
  • A reinforced strike plate with three-inch screws
  • Fiberglass over steel on a front door you will keep ten-plus years

✗ Usually Skip

  • Decorative glass on a door the street cannot see
  • Sidelites added purely to fill a wide opening — a wider slab often looks better and costs less
  • A full-view storm door over a dark, sun-exposed slab
  • Premium hardware finishes on a side or service entry
  • Triple-pane glass in an entry door, where the slab, not the glass, drives performance

When to Buy

Door lead times in our market are seasonal in a predictable way. Everyone decides to replace the front door in August and September, trying to beat winter, and custom orders stack up right when installers are busiest. Prices firm up and schedules stretch.

If you have flexibility, late winter and early spring — roughly January through March — is when lead times are shortest and promotional pricing is most common. If your door is failing now, do not wait for a sale; a door that will not seal is costing you money every day it stays in the opening.

Get a Real Number for Your Opening

Every range in this guide narrows the moment someone measures your actual door. Stop into any of our eight Southwest Michigan showrooms and we will walk you through options at three price points, with no pressure to decide that day.

Explore Exterior Doors

Frequently Asked Questions

How much does it cost to replace a front door in Michigan?
Most homeowners replacing a standard 36-inch front door spend between $2,200 and $3,800 installed in 2026. A basic steel replacement can come in near $900, and a premium fiberglass unit with sidelites and a transom can pass $9,000.
Is it cheaper to replace just the door slab?
Yes, usually by several hundred dollars — but only if the existing frame is plumb, square, dry, and sound, and the new slab matches the old hinge and lock locations. In older Michigan homes that combination is uncommon, and a prehung unit ends up being the better value.
Why are two quotes for the same door so different?
Almost always scope. One quote includes flashing, trim, hardware, disposal, and finish work, and the other does not. Ask both to itemize the same eight things and the gap usually shrinks to a few hundred dollars.
Does a new front door add home value?
Entry door replacement consistently ranks among the highest-return exterior projects in national cost-versus-value studies. It is a small, visible, inexpensive upgrade that changes the first thing a buyer sees, which is why it performs so well relative to its cost.
How long does an exterior door installation take?
A straightforward prehung replacement is generally a single day. Full-frame replacement, rot repair, or a unit with sidelites and a transom can run two days. The long part is the order, not the install — custom configurations often take several weeks to arrive.
Do I need a permit to replace an exterior door?
It varies by municipality in Southwest Michigan. Swapping a door in an existing opening frequently does not require one; changing the size of the opening usually does. Your installer should confirm with your local building department before the order goes in.
What is the cheapest way to get a new exterior door?
A stock-size steel prehung unit in a standard 36-by-80 opening, painted on site, with basic hardware. That path can land under $1,000 installed. Just be honest about where the door is going — on a fully exposed front entry you will likely be doing it again in fifteen years.
\n